Type..............................  100% active Organic Defoamer
Physical form................  Off-white, opaque liquid
Special Properties.........  Prevents foam formation; Does not negatively effect Optical Clarity
Primary use...................  Foam Control for energy cure inks and coatings.

RadAdd® 475 Additive is used to suppress foam in a wide variety of UV/EB systems. 
While effective at breaking existing foam, RadAdd 475 proves most effective in preventing
foam from occurring in the first place.

HOW TO USE:
Typical concentrations of 0.1-0.5% by weight, based upon total solids.
RadAdd 475 can be added at any stage of the formulating process.  For optimal foam control,
however,  it is recommended that RadAdd 475 be added during the earlier stages of processing.

Shelf Life: 12 months, when stored at room temperature.
Packaging: 35 pound pails and 410 pound drums.
Shipping Limitations: None.  Avoid Freezing.

CAUTION: Irritates eyes and skin.  Please see MSDS for additional information.

To Order, Contact Trilogy Group at (630) 893-8539

These data are offered in good faith as typical values and not as a Product Specification. No warranty, either
expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review these recommendations in the specific
context of the intended use and determine whether or not they are appropriate..

Copyright © 2000 Trilogy Group, LLC                                              9 May 00