“Additive Package Differences in
Foam Generation and Consequent Control for UV OPV”
(w/ 2% Silicone Additive + 0.2% Defoamer)

ADDITIONAL COMMENTS:

• Standard UV OPV formulation contains epoxy oligomer at 30% addition rate.
  For greater detail, please click here.

• Control took 3:00+ minutes til complete foam dispersion vs.
  1:49 minutes for formulation containing RadAdd 1116 and FoamZap UV

• Foam Generation Procedure: 
    1) Mechanical Mixing at 175 rpm for 15 sec. prior to pouring; and
    2) Air introduced via diaphragm pump at a rate of 30 gph for 30 sec.

For More Information, Please Call (800) 983-UVEB
or write techsupport@UVadditives.com